1/2
A
B
Motors are supplied with pre-set limit switches, in order to allow two
turns in both directions.
IMPORTANT: Limit-switches setting procedures shown are valid
for right and left side installation.
IMPORTANT: The procedure shown is valid for shutters installed
in internal boxes and for awnings with rear-motor winding.
In case shutters are in an external box or awnings wind front-
motor, the setting-screws must be read reversed (ex.: up as
down and vice versa).
NOTES:
•
Arrows indicate the direction of rotation controlled by each
adjusting screw.
•
Arrows indicate the screw direction for increasing or
decreasing revolutions controlled by the limit-switches.
SETTING THE LIMITS
SWITCHES
