Ganz ZN1-V4FN3, Руководство по установке

Страница: 13 / 35

PixelPro GXi Series ZN1-V4FN3/FN4 Installation Guide
06-2014-B 13
4.2. Main Unit Installation
The main unit can be mounted on the installation surface by the built-in slide
plates.
1) Pull out both slide plates at the bottom of the main
unit.
2) Place the main unit on the installation surface by
facing the bottom of the main unit toward the
installation surface, and mark the drilling spots
based on the alignment holes on the slide plates.
3) Drill the marked spots with a screw driver.
4) Insert the anchor blocks to the drilled holes, and
tighten them into the installation surface.
5) Place the main unit in the same way as in 2 ), and
insert the tapping screws to be passed through the
alignment holes on the main unit.
6) Tighten the screws into the anchor blocks to
fix the main unit to the installation surface.