(6) Mode Save (MODE SAVE)
This saves the current settings.
It loads the saved settings by selecting “USER MODE” from “MODE SELECT”.
Figure 12 MODE SAVE menu
Operating procedure
1. After changing the settings, move the cursor to “MODE SAVE” and press the switch to
display the "MODE SAVE" screen.
2. Move the cursor to “OK” and press the switch to save the settings.
3. When saving is completed, it automatically returns to the "TOP MENU".
(7) Defect Correction (WHITE SPOT CORRECTION)
This detects and corrects white spots.
This function can be used to maintain the quality level.
Figure 13
㻃
WHITE SPOT CORRECTION menu
Operating procedure
1. Cover the lens to prevent light from entering. Move the cursor to “WHITE SPOT
CORRECTION” from the "TOP MENU” and press the switch to display the “WHITE SPOT
CORRECTION” screen.
2. Move the cursor to “OK” and press the switch to run the correction.
3. This automatically returns to the “TOP MENU” when the correction is completed.
Note)
White spots may not be corrected entirely by this function.
White spots may become more noticeable when the SENS UP function is used. This is not a
defect.
Light can not be blocked completely using the mechanical iris focusing mechanism. Do this
in dark conditions as much as possible or use the lens cap to block the light.
En-20
MODE SAVE
CURRENT SETTINGS
ARE SAVED.
OK CANCEL
WHITE SPOT CORRECTION
COVER THE LENS
OK CANCEL