(2) Settings for the Exposure Function (CONFIGURATION)
This is a menu to adjust the camera exposure. Two menus are available based on the AE
MODE setting.
A . For “AE MODE” settings other than "MANUAL"
B. For “MANUAL” setting in “AE MODE”
Figure 8-1 CONFIGURATION menu
AE MODE
Sets the exposure mode.
The mode can be changed to WD
→
NORMAL
→
BLC
→
MANUAL, in this order.
WD: Selects the Wide Dynamic Range function.
This is used when objects with different lighting or a mix of indoor and outdoor are used.
“E-ZOOM” can not be set when this item is selected.
NORMAL: Exposure is controlled by the mechanical iris and electronic shutter.
BLC: Back light correction function operates.
Dark objects resulting from back light are adjusted to the best suited brightness.
MANUAL: Shutter speed is manually set. Set with “SHUTTER SPEED”.
BRIGHT LEVEL
Adjusts the brightness of the screen. Setting values: -5 to 5
Note) This can be adjusted using “AE MODE” in addition to “BLC”.
FLICKERLESS
When an “AE MODE” other than “MANUAL” is selected, the flickerless function can be set
ON/OFF.
If ON is selected, the shutter speed is fixed at 1/100 s (NTSC) or 1/120 s (PAL).
SHUTTER SPEED
The shutter speed can be set when the “AE MODE” is set to “MANUAL”.
Setting values: 1/60(NTSC), 1/50(PAL), 1/100(NTSC), 1/120(PAL), 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000, 1/20000, 1/50000
AGC
Gain is automatically adjusted when AGC is ON based on the brightness of the object. AGC
OFF locks the gain at a minimum.
SENS UP
The brightness is increased by lengthening the CCD imaging time over several fields.
Setting values: OFF, 2, 4, 6, 8, 10, 20, 40 (The setting indicates the maximum imaging time.
The imaging time will change automatically based on the brightness of the object.)
Note) This item can not be selected when the selected “AE MODE” is “MANUAL”. It is
automatically switched to OFF.
When the magnification of “SENS UP” is increased, the screen may look rough, washed
out, or have white spots. This is not a defect.
En-13
CONFIGURATION
AE MODE
BRIGHT LEVEL
FLICKERLESS
AGC
SENS UP
DAY&NIGHT
DETECT TIME
FILTER LIMIT
RETURN END
→
WD
→
3
→
OFF
→
ON
→
OFF
→
AUTO
→
5 sec
→
OFF
CONFIGURATION
AE MODE
BRIGHT LEVEL
SHUTTER SPEED
AGC
SENS UP
DAY&NIGHT
DETECT TIME
FILTER LIMIT
RETURN END
→
MANUAL
→
3
→
1/60
→
ON
→
OFF
→
AUTO
→
5 sec
→
OFF
