ADJUSTMENT
INSTALLATION
2. Switches
* BT Series
* BX Series
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
Down
This camera can be adjusted easily for
viewing in all directions.
After attaching the camera on the wall or
ceiling, adjust camera for the desired
direction.
Then tighten each locking ring and lock
rings with allen wrench as shown in
pircture.
Adjusting the camera direction
Adjusting the view angle and focus
1. Direction and Lens
For ZC-BT series
1) Move the lever to adjust focus and
zoom after taking off the Front Cover
2) Tuurn focus and zoom levers in clock
wise direction to fix the poositions
For ZC-BXseries
Turn the exterior Focs and Angle of
viewing Screw to make adjust by screw-
driver.
BT
BX
*
Attaching to the ceiling or wall
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1.Drilling holes in the ceiling or wall:
Use the template included to mark out the position on the ceiling or wall where you
want to install the unit.
2.When running cables through the interior of the ceiling or wall :
Use the template, and drill three holes for screws used to attach the camera body and
one hole for the cables (Cables).
*
Special instruction
To ensure the best low light performance, this camera has IR LED device to change
automatically to night mode when the environment gets dark. If the high light source
or some object reflecting very bring light is placed within 1m from the installed camera,
it interferes with IR LED performance so that Day & Night function may not perform well.
Ensure that the field conditions are suitable before installing the camera unit.
Attaching to the ceiling
Attaching to the wall
Right
Left
Up
Use the Slide Switch within the camerra
Up
Down
Enter
Right
Left
* L-L : Line Lock
* INT : Internal
INT
L-L
Slide Switch for Sync. System
Multitack Switch for OSD
3. OSD Menu
OSD MENU FUNCTION
LENS
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
ATR
MOTION
EXIT
AUTO MANUAL
AUTO MANUAL
ATW PUSH USER1 USER2 ANTI CR MANUAL PUSH LOCK
OFF BLC HLC
MIRRO BRIGHTNESS CONTRAST SHARPNESS HUE GAIN
OFF ON
OFF ON
PRIVACY
DAY/NIGHT
OFF ON
EXT1 EXT2 AUTO COLOR B/W
NR
CAMERA ID
SYNC
LANGUAGE
CAMERA RESET
1) LENS
2) SHUTTER/AGC
3) WHITE BALANCE
4) BACKLIGHT 5) PICTURE ADJUST 6) ATR(D-WDR)
7) MOTION DETECTION
BRIGHTNESS adjusts DC level of the lens
* Simply make the adjustment in the following order to help
make the focusing easier:
- Select MANUAL
- Adjust lens focus well
- Then return to AUTO
Turn the Switch toward Left or Right side, Select AUTO or MANUAL
Right
Left
SETUP
SETUP MENU
HIGH LUMINANCE
LOW LUMINANCE
MODE
AUTO IRIS
MODE
SHUT+AGC
ATW
PUSH
USER1
USER2
ANTI CR(ANTI COLOR ROLLING)
MANUAL
PUSH LOCK
Attention
Attention
Attention
BRIGHTNESS 000 ~ 255
BRIGHTNESS x0.25 ~ x1.00
SHUTTER 1/50 ~ 1/10000 *Flickerless
NTSC :1/100
PAL : 1/120
AGC 6.00 ~ 44.80
SPEED 000~ 255
DELAY CNT 000~ 255
B-GAIN 000 ~ 255
R-GAIN 000 ~ 255
B-GAIN 000 ~ 255
R-GAIN 000 ~ 255
LEVEL 019 ~ 078
Attention
When MOTION DEC ON,
only 4 AREAS available.
* NR : DIGITAL NOISE REDUCTION
* Y LEVEL : B/W SIGNAL LEVEL
* C LEVEL ; COLOR SIGNAL LEVEL
* Return to Factory Setting
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
SETUP
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
SETUP
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
SETUP
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
SETUP
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
AUTO
MANUAL
ON
ON
Japanese
SHUT + AUTO IRIS
MODE
AGC
OFF
BLOCK DISP
ON
MOTION DET
TOP 000 ~ 244
BOTTOM 000 ~ 244
LEFT 000 ~ 474
RIGHT 000 ~ 474
DETECT SENSE 000 ~ 127
OFF
ENABLE
MONITOR AREA
ON
OFF
AREA SEL
1/4 ~ 4/4
INDOOR
AGC x0.50~ x2.00
ENVIRONMENT OUTDOOR
MIRRO OFF - ON
LUMINANCE MID-HIGH-LOW
CONTRAST MID-HIGH-LOW
BRIGHTNESS 000 ~ 255
CONTRAST 000 ~ 255
SHARPNESS 000 ~ 255
HUE 000 ~ 255
GAIN 000 ~ 255
BLC-HLC
ON
AUTO
B/W
COLOR
EXT2
8) PRIVACY MASKING
2nd Page OSD
SETUP
SETUP MENU
PRIVACY OFF
DAY/NIGHT AUTO
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL
ON
ON
PRIVACY
TOP 000 ~ 244
BOTTOM 000 ~ 244
LEFT 000 ~ 474
RIGHT 000 ~ 474
OFF
AREA SEL
1/8 ~ 8/8
COLOR
1 ~ 8
TRNSP
1.00 ~ 0.00
MOSAIC
Y LEVEL 000 ~ 15
C LEVEL 000 ~ 15
Y/C
OFF
Y
C
NR MODE
9) DAY/NIGHT
SETUP
SETUP MENU
PRIVACY OFF
DAY/NIGHT EXT1
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL
10)NR 11)CAMERA ID 12)SYNC 13)LANGUAGE 14)RESET
SETUP
SETUP MENU
PRIVACY OFF
DAY/NIGHT AUTO
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL
TYPE
DC
AUTO IRIS
SPEED 000 ~ 255
AUTO
MANUAL
MODE
AUTO
OPEN
CLOSE
German French Russian Portuguese Spanish Chinese
DAY/NIGHT
DELAY CNT 000 ~ 255
DAY->NIGHT 000 ~ 255
NIGHT->DAY 000 ~ 255
ON
OFF
BURST
B/W
IR OPTIMIZER
ON
OFF
MODE AUTO - CENTER
LEVEL
ON
OFF
000~031
BURST
* START SET UP MENU
Press the Middle Multi Tact Switch, the main setup menu is displayed on the monitor
screen
Select the function
by using the switch
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
the switch
Up
Down
Enter
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PIC ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
1st Page OSD
* OSD automatically reflects Power and Sync Switch positon to be set as:
Power
DC 12V
INT
INT
* INT: Internal Sync
* LL : Line Lock
LL
INT
INT
INT
LL
LL
AC 24V
Sync Switch
Sync
"Flickerless" function can be available by SHUTTER/AGC MANUAL
SHUTTER 1/100(NTSC) 1/120(PAL) return to "AUTO" to fix the setting
For regular Auto-Iris use, ensure to set "AUTO IRIS" (Not "SHUT+AUTO IRIS)
in this “SHUTTER/AGC" OSD menu
* IR OPTIMIZER : It minimizes overexposure
when an infrared LED light source is used
Do not set the above EX2
DAY/NIGHT uses EX1 not AUTO for regular applications
WARNING
