PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
56
56
6.8 CONFIGURING NETWORK
To set-up the Network options, highlight NETWORK and press ENTER.
Configure all the menu of network.
6.8.1 ETHERNET PORT
IP set up menu for Ethernet port. It require to setup when connect IP cameras on Ethernet port or
you access NVR from client SW.
DHCP: When selected the NVR will obtain an Ethernet IP address automatically if
connected to a DHCP server or router.
IP ADDRESS: Set IP address when DHCP is not being used.
GATEWAY: Set Gateway when DHCP is not being used.
SUBNET MASK: Set subnet mask when DHCP is not being used.
1ST DNS SERVER: Set the 1st DNS server address when DHCP is not being used.
2ND DNS SERVER: Set the 2nd DNS server address when DHCP is not being used.
NVR PORT: The port number that the NVR uses to support to the remote software.
WEB SERVER PORT: The port number that the NVR uses to support remote connection
from Internet Explorer or other web browsers.
Using Internet router, If connect more than one NVR, you should configure service port and
web service port differently.
MAX TX SPEED: Specifies the maximum bandwidth that the NVR can use during a
remote connection.
Note) Both NVR & WEB SERVER PORT will need a firewall rule creating for remote Connection
Note) uPNP (Auto Port Forwarding) is activated always background.
Note) uPNP function for automatic forwarding setup would not compatible depending on
router and hub, in this case user should configure port forwarding properly.
