PixelMASTER GXi Series NVR
User’s Manual
05-2014-A
34
34
TYPE: You can select connection type AUTO/MANUAL/RTSP
AUTO:
Select this mode for peer to peer connection with built-in HUB
The Default IP address will be allocated 192.168.172.101 ~ 104 (4ch) / 192.168.172.101 ~ 108
(8 & 16ch) automatically.
Keep default value of IP camera in ID, Password, RTSP Port, HTTP port, HTTP type
If the ID and password of IP camera is not default value, NVR can't change the configuration of IP
camera at "Auto" connection mode. So you need to specify ID and password from “Detail”
menu.
MANUAL:
Select this mode for 3
rd
party ONVIF camera or camera is located in
the network connected
“Ethernet” / ”Local” port.
Select network port for the camera you want to connect.
The IP range of Local or Ethernet PORT for the connection between IP camera and NVR should be
same.
You have to use ‘Detail menu
for configuration of IP camera such as port number, ID, pass
word and so on.
RTSP URL:
You can use RTSP command to make a connection with IP camera.
IP ADDRESS: IP address of IP camera.
RTSP PORT: RTSP port number for RTSP transmission.
INPUT RTSP URL: Specify the command of RTSP connection. IP address and port number is auto
matically specified. [example : rtps://192.169.0.101:554/
gnz_media/main/
]
APPLY: Save the configuration.
CANCEL: Cancel the configuration.
IP camera configuration cannot be modified if RTSP connection selected.
DETAIL(
): Modify the configuration of the camera if you need.
If the configuration (RTSP port/HTTP port/ HTTP Type / ID / password) of the camera is not
default value, you have to modify it. [Supported model]
Set configurations [ONVIF mode]
