Ganz Genstar ZNT8-BA1F-T Series, Руководство пользователя

Страница: 13 / 36

GANZ ZNT8-BA1Fxx-T Thermal Network Camera
User Manual
Precautions
Issue V1.0 (2016-02-22) 11
3
Device Installation
3.1 Installation Preparation
When installing the camera, you may require the following tools and accessories listed
in Table 3-1. You need to prepare only listed tools as accessories are delivered with the
camera.
Table 3-1 Installation tools
Tool Appearance
Cross screwdriver (self-provided)
Claw hammer (self-provided)
Impact drill (self-provided)
Spirit level (self-provided)
T15 plum blossom screwdriver
（
delivered
with the camera
）
Stainless hexagon screw
（
delivered with
the camera
）
Self-tapping screws
（
delivered with the
camera
）