Q.uick Start Guide
Q.brixx
69
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
Apply Sample Rate to Measurement Modules
There is a Sample rate column in the test.commander project. Using this column, apply
the desired sample rate for each channel. Remember that variables/channels located
on a UART need to share the same sample rate.
The measurement modules in the test.commander project display the UART and
address for which they are configured.
Example:
Q.bloxx A101 (1/1) = Q.bloxx A101 (UART 1/Address 1)
Q.bloxx A104 (1/2) = Q.bloxx A101 (UART 1/Address 2)
Q.bloxx A107 (2/1) = Q.bloxx A101 (UART 2/Address 1)
Accessing Logger Configuration
The preliminary settings are now configured. Highlight the Q.station and click the
Logger configuration button.
