background image

Nominal voltage:

12/24 VDC SELV LPS

Permitted input voltage:

10 to 26 VDC SELV LPS

Input current:

1.2 A

Data storage:

Internal flash memory for configuring
and booking memory, data preser-
vation min. 10 years

RFID reader types:

See order information

Control elements:

- RFID reader
- Barcode reader

Display elements:

- Full graphics monochrome display
  with white LED background lighting,
  resolution 128 x 128 pixels,
  visible area 65 x 65 mm
- Barcode reader slot
- RFID reader (illuminated)
- Integrated LED light for rate and 

status display, different light-colours

- Acoustic signal

Barcode reader:

CMOS reader
reads 1D and 2D barcodes,
also possible with smartphone displays

Host interface:

Ethernet 10/100 Mbit/s and RS 485

Software integration:

GAT DIRECT.Connect

Signal inputs:

4 x optocouplers (configurable)
- Input voltage: 0 to 30 VDC
  U

Low

 < 2 VDC, U

High

 > 6 VDC

- Input current: 4.5 mA

Signal outputs:

4 x relays (configurable NO/NC)
- Switching voltage DC: max. 30 V SELV
- Switching voltage AC: max. 15 V SELV
- Continuous current: max. 1.8 A 
- Switching power: max. 54 W, 27 VA

Connection terminals:

0.5 to 1.5 mm

2

Housing material:

Plastic with safety glass front

Dimensions (housing):

approx. 280.6 x 194 x 135.5 mm
(approx. 8.21 x 7.64 x 5.33 inch)

Permitted ambient temperature: -25 to +50°C (-13 to 122 °F)
Storage temperature:

-25 to +70°C (-13 to 158 °F)

Protective type:

IP X3

Protective class:

III

Weight:

approx. 2 kg (4.4 lbs)

2

www.gantner.com

Technical data

Typical application

Dimensions

1. LED Light for tariff and status display (different colours)
2. Monochrome display
3. Status  LEDs
4. Illuminated, circular RFID scan field
5. Inset for barcode tickets (removable for larger barcodes or smartphones)
6. Tubular holder, Ø 30 mm (not included in scope of supply

Valid as from June 16

th

 2015 • Technical data subject to modifications without notice! 

DB_GAT-ACCESS6600--EN_11.indd • PartNo.: 822630

135.5 mm (5.33“)

280.6 mm (8.21“)

194 mm (7.64“)

2

1

1

4

3

5

5

6

6

Turnstile

GAT Access 6600

Power supply

Data carrier

Network

Содержание GAT Access 6600 Series

Страница 1: ... facilities such as public swimming pools indoor and outdoor water facilities and attraction parks The terminal is mounted directly onto turnstiles or similar access control hardware and provides convenient operation for the facility guests Identification at the terminal is achieved either with barcode tickets 1D and 2D or with contact free RFID data carriers Radio Frequency Identification The cle...

Страница 2: ...s 4 x relays configurable NO NC Switching voltage DC max 30 V SELV Switching voltage AC max 15 V SELV Continuous current max 1 8 A Switching power max 54 W 27 VA Connection terminals 0 5 to 1 5 mm2 Housing material Plastic with safety glass front Dimensions housing approx 280 6 x 194 x 135 5 mm approx 8 21 x 7 64 x 5 33 inch Permitted ambient temperature 25 to 50 C 13 to 122 F Storage temperature ...

Страница 3: ...he figure below 4 and swing the electronics 90 forward 5 Attachment of the tubular holder and cable installation Insert the GAT Access 6600 onto the tubular holder 7 until the stop 6 is reached Tighten the screws of the two clamps 1 2 firmly so that the GAT Access 6600 is secure and cannot be removed from the tubular holder Feed the connecting cables through the tubular holder Connect the cables t...

Страница 4: ... such as turnstiles etc each relay provides NC normally closed and NO normally open operation The permitted switching power levels see technical data must never be exceeded Optocoupler inputs Potential free inputs for status detection An input voltage must be applied to activate the input This voltage can be supplied by the terminal s power source or from an external power source Please observe th...

Отзывы: