Basic Functions
13
Hydromette BL Compact TF 3
2.3
Setting Menus
If the
up
or
down
buttons are pressed in
Ready mode
, the various
setting menus are shown in sequence:
1.
Measurement menu
(
Ready mode
)
:
The measuring
process can be carried out here
2.
Measuring mode selection:
Here you can specify the
measuring mode (section 2.3.2)
3.
Maximum value display:
The largest value measured is
shown here (section 2.3.3)
4.
Minimum value display:
The smallest value measured is
shown here (section 2.3.4)
5.
Saved menu:
The last 5 values measured can be called
here (section 2.3.5)
2.3.1
Measurement Menu (Main Menu)
The last measurement with the note
"Hold"
is shown here.
In this menu, a new measurement can be started by pressing the
"M"
button.
During the measuring process, the
"Hold"
symbol disappears from
the display. After releasing the
"M"
button, the measured value is
saved. The
"Hold"
symbol is displayed again.
If the new measured value is larger than the previous maximum
value,
"Max"
flashes on the display. If the value is not to be saved,
the
"M"
button must be pressed
briefly
. If the value is not to be
saved, a new measurement is started with a
long
press on the
"M"
button without changing the previous maximum values.
