Appendix
31
Hydromette BL Compact TF 3
6 Appendix
6.1
General concluding remarks
The notes and tables in these operating instructions on permitted or
normal humidity conditions in practice and the general definitions of
terms have been taken from the specialist literature. No
responsibility can therefore be taken by the manufacturer of the
measuring device for the correctness of this information.
The conclusions to be drawn from the measurement results are
related to the individual conditions and the knowledge from
professional experience for each user. In cases of doubt, for
example concerning the permitted moisture content in coating or
screed substrates when laying floor coverings, it is recommended
to contact the manufacturer of the coating or floor covering and to
take account of the recommendations of trade organisations.
Guarantee conditions
Gann Mess- u. Regeltechnik GmbH shall rectify material or
manufacturing defects at no cost by repair or replacement of the
defective parts at its choice that occur within six months of
purchase or one year of dispatch from the factory, whichever period
ends first. Neither the replacement nor the repair of a part is
grounds for a new guarantee or an extension of the original
guarantee.
Batteries and other wearing parts such as cables or filter material
are excluded from the guarantee.
When claiming under the guarantee, the device must be sent post-
free to Gann Mess- u. Regeltechnik GmbH or the supplier with
details of the claim and accompanied by proof of purchase. The
guarantee is void if repairs or other manipulations have been
carried out by the owner or a third party.
