G&L MMC-A2, Руководство по оборудованию

Страница: 87 / 192

Standalone MMC Control
G & L Motion Control Inc. MMC Hardware Manual 79
Figure 4-19: Aux I/O Port Inputs
4.7.2.4 Aux I/O Port Encoder Input
The Aux I/O Port provides an input for a differential
incremental encoder. This encoder is typically used as a
digitizing (read only) axis. This axis then acts as a
“master” axis, and the other servo axis are “slaved” to
its position. The Aux I/O Port encoder input accepts
RS422 differential inputs. The encoder signals should
be quadrature type. All encoder wiring between the
MMC and the drive should be shielded twisted pair as
shown in
Figure 4-20 .
DC IN 1
DC IN 2
DC IN 3
DC IN 4
DC IN 6
COM
COM
DCSSA
+24V
DC IN 8
DC IN 9
DC IN 10
DC IN 11
+24V
DC IN 7
DCSSB
DC IN 5
DC IN 12
MMC AUX I/O Connector
8
31
32
33
34
35
36
37
11
10
38
39
40
41
42
43
44
9
SINKING
INPUTS
SOURCING
INPUTS