7
8
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, dam-
aging your health and well-being.
When replacing old appliances with newones, the retailer is legally
obligated to take back your old appliance for disposals at least free of charge.
11. The Warranty
11.1 All product, which produced by the G&& Testing Instrument
Factory in Changchu city, have direct warranty provided by the producer,
this including refund, exchange and repair service.
11.2 Within one year after purchase, the producer offers a free repair
service to all G & G Product, which become defect under proper usage
without human damage. The customer are kindly requested, to mail the
product as well as its original package back to the producer, the producer
will send the repaired or exchanged product to the customer back within
one week.
11.3 There will be a slight charge for the repair service of those prod-
ucts, by which the warranty period expires.
11.4 Please attach the address, postal code and telephone number of
the buyer, so that we can mail the repaired product back in time.
12. Contact
Address: G&G GmbH
Koenigstr. 34
41460 Neuss
Germany
Tel: +49-2131-609-7271
Fax: +49-2131-609-7273
Email: [email protected]
Website: www.gandg.de
Remarks
Option by JJ100B; JJ200B
Quantity
1
1
1
1
1
Article Description
Operation manual
Scale pan
Power cable
Calibration weight
Wind shield
restore the fabric configuration
1.remove the object
2. restore the fabric configuration
restore the fabric configuration
Press the “TARE” key with empty pan,
the balance shows 0, then calibrieren.
1. remove the object, Press the “TARE”
key with empty pan, the balance shows
0, then calibrieren.
2. restore the fabric configuration
1.check the C3 and C4 configuration
2.check the cabel
3. please contact our service
department
1.Error by sensor
2.Error by calibration
1.Object weight beyond
capacity
3.Error by sensor
Error by sensor
Unstable zero or zero not
correctly set
1.Object weight beyond
capacity
2.Error by sensor
1.Parameter configuration
Error
2.Cable connection problem
or cable is defect
3.internal R232 Chip is
defect
The message “F-L”
The message “F-H”
The message “C-L”
by Calibration
The message “C-F”
by Calibration
The message “C-H”
by Calibration
Störung der R-232
Übertragung
10. Trash
Meaning of crossed–out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities.
Contact you local government for in formation regarding the collection
systems available.
9. Packing List
