G&G CYGG-080, Инструкция по эксплуатации, Страница: 19 / 24

15
*
Particulate Pollutants
REPLACEMENT
PARTS
If you need to replace any part or assembly, please contact G&G
filtration, s.r.o. , or the company that implemented the filtration unit, to
after agreement, arranged delivery and assembly of the required component.
DEMONTAGE AND
LIKVIDATION
When disassembling the device, follow the steps opposite to those described in
the INSTALLATION AND REPLACEMENT chapter. If you are unsure of the
procedure, contact the unit manufacturer or call a specialist company.
Due to the nature of the working conditions, which vary from application to
application, it is not possible to determine the lifetime of the cyclone in general.
However, before disposing of the cyclone and its parts, render them unusable.
When disposing of the unit parts, the instructions of the manufacturers of the
individual components as well as the relevant national regulations on waste
disposal must be observed. Individual
We recommend that you have the components of the device disposed of at a
specialised disposal facility.
6 ǀ DOCUMENTATION OF THE MANUFACTURER AND
SUBCONTRACTORS
ADDED
DOCUMENTATION
The following manufacturer's documentation is supplied with this filtration device
and subcontractors:
- delivery note (handed over on delivery)
- declaration of conformity
- manufacturers' manuals for selected components
- electrical documentation
- production documentation (drawings, etc.)
7 ǀ WARRANTY CONDITIONS