G&D VisionXS-IP-F-DP-UHR, Дополнительные инструкции по установке и эксплуатации

Страница: 113 / 148

Configuration
G&D VisionXS-IP-F-DP-UHR · 36
English
Conf
ig
Panel
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then
click on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to adjust the operating mode of the
RS232 interface of the computer module.
Click on the tab CON if you want to adjust the operating mode of the
RS232 interface of the console module.
5. Select one of the options of the Serial communication field under the para-
graph Configuration :
RS232  The data stream of an RS232 device is transmitted from the
computer module to the console module ( default setting ).
RS422  The data stream of an RS422 device is transmitted from the
computer module to the console module via separately
available G&D RS232-422 adapters .
6. Click on Save .