The »DVIMUX8-USB« KVM switch
G&D DVIMUX8-USB ·
3
English
The »DVIMUX8-USB« KVM switch
The
DVIMUX8-USB
KVM switch enables you to operate up to eight computers via
one console.
The console is provided with a USB keyboard, a USB mouse and a digital and/or
analog monitor. The computers connected to the KVM switch are operated from
the installed console.
The switching between computers takes place either via the pushbuttons on the
front panel, configurable key combinations, or a serial device which is connected to
the
Service
port.
The front panel of the device provides two USB 2.0 interfaces to operate any USB
devices. The connected USB devices are available to whichever active computer.
After enabling the USB hold function (see page 32), the USB devices can be perma-
nently switched to a defined computer (see page 13). The switching of the USB
devices remains the same when switching the KVM channel.
Package Contents
1 ×
DVIMUX8-USB
KVM switch (basic or multi-channel variant)
1 ×
DVI-Divider
adapter per supported video channel
1 × 19” RM-Set-435
1 × data cable (
Update-Cable-2
)
1 × power cable
1 × »Installation and Operation« manual
A corresponding KVM cable is required in order to connect the computers to the
KVM switch. The appropriate KVM cable sets available are listed on page 33.
NOTE:
The KVM switch emulates keyboard and mouse on each channel and
hence guarantees error-free booting at all times.
NOTE:
To install the devices to a 19” rack, the scope of delivery of the multi-chan-
nel devices contains rackmount sets (19” RM-Set-435).
The devices can be installed with both the front panel or the back panel facing for-
wards.
