Installation
G&D DVIMUX4-DL-PS/2 ·
4
Connecting the console devices
Keyb.:
Insert the connection cable of the PS/2 keyboard to this socket.
Mouse:
Insert the connection cable of the PS/2 mouse to this socket.
Speaker:
Connect the speaker for the output of the audio signals of the active compu-
ter to this interface.
Monitor 1:
Connect the DVI cable of the monitor to this interface.
NOTE:
Connect the cables of the console and the computers preferably block by
block and from the bottom up. By doing so, you will avoid already connected
cables blocking your view of the interfaces.
Figure 2: Interfaces to connect the console devices
NOTE:
connect a USB keyboard and/or USB mouse to the
USB K/M
interfaces at
the front panel of the device.
The PS/2 interfaces to connect the console keyboard and mouse (at the back
panel of the KVM switch) and the USB interfaces at the front panel of the device
can be used
at the same time
.
NOTE:
When deploying a multi-channel variant of the KVM switch, the separate
video signals of computers in a multi-monitor installation can be transmitted to
two (MC2), three (MC3), or four (MC4) monitors.
The device provides up to four video inputs (
DVI-I CPU 1.x
to
4.x
) for each monitor
you want to connect.
If required, connect the other monitors to the
Monitor x
interfaces of the MC variant.
Keyb.
Mouse
Line In
Power
CPU 4
DVI-I CPU 4.1
Keyb.
Mouse
Line In
CPU 1
DVI-I CPU 1.1
Keyb.
Mouse
Line In
CPU 2
DVI-I CPU 2.1
Keyb.
Mouse
Line In
CPU 3
DVI-I CPU 3.1
Monitor 1
Keyb.
Mouse Speaker
CON
Содержание DVIMUX4-DL-PS/2
Страница 1: ...G D DVIMUX4 DL PS 2 Installation and Operation...
Страница 37: ...Notes G D DVIMUX4 DL PS 2 34...
Страница 38: ...Notes 35 G D DVIMUX4 DL PS 2...
Страница 39: ...Notes G D DVIMUX4 DL PS 2 36...
