G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 127 / 152

Configuration
G&D DP1.2-Vision-Fiber · 48
English
Adjusting the waiting period of the screensaver
The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
How to adjust the waiting period of the screensaver:
NOTE: This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter if you want to adjust the screen-
saver of the remote console (at the CON module).
Select the row Local console setup and press Enter if you want to adjust the
screensaver of the local console (at the CPU module).
3. Under Screensaver (min) enter a waiting period (1 to 999 minutes) for the
screensaver.
Entering the value 0 disables the screensaver .
4. Press F2 to save your settings.
Config
Panel
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to configure the screensaver of the local
workstation (on the CPU module).
Click on the tab CON if you want to configure the screensaver of the remote
workstation (on the CON module).
5. In the Screensaver (minutes) row, enter the waiting time (1 to 999 minutes) of
the screensaver.
Entering the value 0 disables the screensaver .
6. Click on Save .