G&D DP1.2-Vision-CAT, Инструкция по установке и эксплуатации

Страница: 90 / 132

Configuration
21 · G&D DP1.2-Vision-CAT
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application Config Panel :
 The on-screen display is shown on the console monitor. Most configuration settings
can be changed directly on the OSD of the console.
 The web application Config Panel provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Changing hotkeys Ctrl 26
Changing the OSD key
Num
27
Opening the on-screen display via double keypress turned off 28
Changing the exclusive key Print 29
Changing the time span of the input lock 1 second 30
Right for exclusive access to the console given 31
Changing the video mode of consoles always on 32
Selecting the EDID mode of the KVM extender auto 34
Reducing the colour depth of the image data to be transmitted 24 bit 32
Freeze mode disabled 36
Selecting the USB-HID mode PC default 38
Support of special keyboards default 40
Changing the scancode set of PS/2 keyboards scancode set 2 41
Keyboard required to start the user module no 43
Adjusting the waiting period of the screensaver disabled 44
Selecting a keyboard layout for inputs via OSD German 45
Resetting the default settings 46