G&D DP1.2-Vision-CAT, Инструкция по установке и эксплуатации

Страница: 96 / 132

Configuration
27 · G&D DP1.2-Vision-CAT
Changing the OSD key
The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 26) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier Ctrl and the OSD key Num .
How to change the current OSD key:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Key , press F8 to select an OSD key. Now you can open the OSD
when pressing the OSD key together with the hotkey modifier(s):
Num  Num key ( default )
Pause  Pause key
Insert  Insert key
Delete  Delete key
Home  Home key
End  End key
PgUp  Page Up key
PgDn  Pace Down key
Space  Space key
5. Press F2 to save your settings.
Confi
g
Pan
el
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
tab.
4. Under
Hotkey
, you can select an OSD key. The OSD key can be pressed
together with the hotkey modifier(s) to open the on-screen display.
Select the OSD key from the keys
Pause
,
Insert, Delete
,
Home, Page Up
,
Page Down
,
Num
,
End
or
Space
.
5. Click
OK
to save your changes.