G&D DP-HR-CON, Установка и эксплуатация

Страница: 174 / 196

User module »DP-HR-U-CON-2-Fiber-DH«
169 · Target and user modules (DP-HR-U)
Transmission 1|Rx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Tx interface of the same Dynamic Port provided at the
matrix switch.
Transmission 2|Tx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Rx interface of another Dynamic Port provided at the
matrix switch.
Transmission 2|Rx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Tx interface of the same Dynamic Port provided at the
matrix switch.
Power supply
Main Power:
Connect the supplied power cable.
Insert the cable’s Schuko plug in a power socket.
Red. Power: Connect the connection cable of a compatible power pack to provide the
user module with a second, redundant power supply.
Startup
Start the user module by pressing the Main Power button of the power pack.
ADVICE: The active hotkey configuration is displayed during the
System Startup
of
the matrix switch.
Trans. 1
Trans. 2 Mouse
Keyb. Keyb./Mouse
Generic
Speaker Micro In
USB Devices
DisplayPort
Out 1 Out 2
LED Out
Main P
ower
Red. Power