G&D DL-DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 153 / 232

Initial configuration of the network settings
32 · G&D DL-DVI-Vision-IP-Fiber
Configuring the network interface
How to configure the network interface:
1. Open the remote OSD of the computer module by pressing the remote hotkey
( default : Ctrl+Num ), if you want to change the configuration of the computer mod-
ule.
Open the local OSD of the console module by pressing the local hotkey ( default :
Alt+Num ), if you want to change the configuration of the console module.
2. Select the row Network setup and press Enter (remote OSD) or F11 , select the row Net-
work and press Enter (local OSD).
3. Select the entry Interfaces and press Enter .
4. Enter the following data under Management :
5. Press F2 to save your settings.
Operational
mode:
Press F8 to select the operational mode of the interface:

Off: switch network interface off.

Static: A static IP address is assigned.

DHCP: IP address is obtained from a DHCP server.
IP address:
Enter the IP address of the interface.
The operational mode DHCP does not allow making entries.
Netmask: Enter the netmask of the network.
The operational mode DHCP does not allow making entries.