G&D CAT, Руководство по установке

Страница: 28 / 40

Installation
6 · CAT-Repeater
Connecting a target module via expansion module
The following drawing shows how to connect a target module to the matrix switch
using the expansion module:
Preparation
1. Install the digital matrix switch.
2. Install the target module you want to connect to the matrix switch using the
CAT-Repeater expansion.
Since the expansion module connects the target module to the matrix switch at a
later point, it is not necessary to connect the target module at this moment.
DVI-CPU
7
3 5 1
6 8 4 2
Dynamic Ports
Service
Trans. Line In Line Out Power Loop Power In
CAT-Repeater