∙Make sure to put the safety chain and check whether the screws/clamps are screwed
properly when installing the fixture.
∙Make sure the lens are in good condition. It’s recommended to replace the units if there are
any damages or severe scratches.
∙Make sure the fixture is operated by qualified personnel who know the fixture before
using.
∙Keep the original packaging in case there is any future need for any warranty repair or
service.
∙Don’t try to modify the fixtures without any instruction by the manufacturer or the
appointed repairing agencies.
∙Warranty is voided if there are any malfunctions from not following the user manual
while operating or any hazardous operation, like shock short circuit, electronic shock, lamp
broken, etc.
Features
•
300W High Output White LED
•
16 RGBW Cree LED’s for Halo effect
•
20,000 hour lifespan and lower power consumption
•
3° Beam Angle
•
Overtemp protection: When the internal temperature hits 40°C and then the fans
begin to work, if the internal temperature hits 70°C, the brightness reduces to half
until it cools.
•
Color Wheel: 7 white
•
1 static Gobo Wheel: 8 gobos +white
•
1 Rotating Gobo Wheel: 7 gobos +white
•
Prism: 16-facet Prism + honeycomb prism, bi-directionally rotatable at variable
speeds
•
High speed strobe effect with 1-25 hz
•
Internal program available
•
16/18 DMX Channels USITT DMX-512
•
DMX 512, master-slave and sound activated controllable or auto operation
•
Colorful LCD display
TX6 LED 300 Beam – GAMMA LED Vision Page 7 of 23
