Regardless of the rigging option you choose for your TX6 Beam, always be sure to secure
your fixture with a safety cable. The fixture providers a built-in rigging point for a safety
cable on the hanging bracket as illustrated above. Be sure to only use the designated
rigging point for the safety cable and never secure a safety cable to a carrying handle.
∙The moving head is for spot effect for on-site decoration purpose. So make sure to operate
the fixture until it is in normal temperature.
∙This light should be keep away from strong shaking during any transportation or
movement.
∙Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.
∙Don’t expose the fixture in overheating, moisture or environments with too much dust
when installing it.
∙Make sure the installation environment is in good safety condition before installing the
fixture.
TX6 LED 300 Beam – GAMMA LED Vision Page 6 of 23
