Gamma Semi, Руководство пользователя

Страница: 15 / 126

15
EN
3. When you reach the desired pressure, place the pear and sit quietly, not
moving . The measurement process began.
If the measurement is not performed, and the display shows « », the cuff
pressure was insufficient to perform the measurement. In this case it is
necessary to pump up the pressure in the cuff to a higher value, at least
20 mm Hg. Art. higher than the previous.
Reading Measurement Results
The measured systolic and diastolic blood pressure values, as well as
the pulse are now displayed. The appearance of this symbol signifies
that an irregular heartbeat was detected. This indicator is only a caution.
It is important for you to be relaxed, remain still and do not talk during
measurements.
NOTE:
We recommend contacting your physician if you see this indicator
frequently.
Discontinuing a Measurement
If for any reason you must stop measurement (for example, due to poor
health), open the air release valve on the blower. The cuff pressure
decreases. In this case, the display may appear symbol error «Err».
Switch off the appliance. The device then immediately lowers the cuff
pressure automatically.
MEMORy FUNCTION
Semi-automatic Blood Pressure Monitor Gamma
®
TM Semi automatically
stores the result measured. To see the result of the last measurement
press and hold the ON/OFF button for at least 3 seconds. If an irregular
heartbeat interval was detected in the measurement stored in memory, the
icon will be displayed.