Gamma Optima, Руководство пользователя, Страница: 56 / 60

56
E0
Testing pressure with
Clothes
Take off the clothes
and test it gain
The marker of arm
cuff is not in
alignment with the
arm’s artery.
Align the marker of
arm cuff with the
arm’s artery, and
measure again.
E1: Can’t normally
increase pressure
Check your cuff for air
leakage
Replace the cuff
with
new one
E3: Inflate pres -
sure too high
Remeasure or send
back to dealer to
recalibrate
E2 E4: Hand shak -
ing while measure -
ment
Hand or body shaking
while measurement
Keep static position
and
measure again
Battery icon on
Battery low power
Replace battery and
measure again
The systolic
pressure Value or
diastolic Pressure
value too high
1.The cuff was held
lower than your heart
Keep correct
position and
measure again
2.The cuff was not
attached properly
3.You moved your
body or spoke during
measurement
The systolic
pressure value or
diastolic pressure
value too low
1.The cuff was held
higher than your heart
2.You moved your
body or spoke during
measurement
CARE AND MAINTENANCE
To avoid the monitor attracting dirt, dust or other contaminants,
wash and dry your hands thoroughly before use.
Cleaning
• To clean the monitor exterior, wipe it with a cloth moistened with
tap water or a mild cleaning agent, then dry the device with a soft