Borealis XL Z- Gamma LED Vision
3
1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing our Borealis XL Z. For your own safety, please read this manual before
installing or using the device. This manual covers the important information on installation and
applications. Please install and operate the fixture with following instructions. Meanwhile, please
keep this manual for future needs.
In the box you will find:
•
Borealis XL Z 1
•
PowerCon Cable:
1
•
DMX Signal Cable
1
•
Pair of Omega Brackets
Mounting and Operation
Use the clamps that are included with the Borealis XL Z to hang the fixture from the mount(s)
on the fixture’s yoke.
As an added safety measure be sure to attached at least one properly rated safety cable to the
fixture using on of the safety cable rigging point integrated in the base assembly or on the yoke.
(or moving light)
Clamp Mounting: The Borealis XL Z moving head provides a unique mounting bracket assembly
that integrates the bottom of the base, and the safety cable rigging point in one unit.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
included omega bracket using a M10 screw fitted through the center hole of the “omega
bracket”.
As an added safety measure be sure to attached at least one properly rated safety cable to the
fixture using on of the safety cable rigging point integrated in the base assembly.
