INFORMATION pag. IN 13
Daily cleaning of the trolley
1
Unplug the trolley (if it was plugged).
2
Remove waste and useless material from containers and supports.
3
The cleaning products which can be used are numerous, be they detergents,
degreasing agents or anti-bacterial agents. However their characteristics must be
compatible with the materials that are to be cleaned; therefore it is recommended
that no type of denatured alcohol or isopropyl is used, especially on swinging
pockets.
Apply a small quantity of the cleaning product to the surface and run a dry cloth over it.
Complete cleaning of the trolley
If a complete cleaning of the trolley is necessary, proceed as follows:
1
Unplug the trolley (if it was plugged).
2
Remove everything that was placed on the trolley.
3
Remove all components from the body (described starting from pag. BO 1).
4
Remove all components and accessories from the trolley (described starting from
pag. BO 1).
5
Apply a cleaning product and clean all visible surfaces.
The cleaning products which can be used are numerous, be they detergents,
degreasing agents or anti-bacterial agents. However their characteristics must be
compatible with the materials that are to be cleaned; therefore it is recommended
that no type of denatured alcohol or isopropyl is used, especially on swinging
pockets.
6
For the re-assembly of the trolley, follow the procedure described in steps 1-4 in
reverse order.
Long periods of non-usage
If the trolley is not going to be used for long periods, clean it thoroughly, re-pack it and
store it in a dry place.
“Exceptional” trasportation
If the trolley needs to be used in a new site, clean it thoroughly, re-pack it and transport it
by means of adequate lifting and transportation equipment.
