INFORMATION pag. IN 10
Safety labels
Each component or accessory of
MINI
containing or sustaining a load (such as a
medical devices) is provided with an adhesive label indicating the maximum allowable
loading weight.
Each time you use one of these components or accessories, verify that the load
you are going to place into or onto it does not exceed the maximum allowable
loading weight.
Obviously, in order to check the maximum weight it is necessary to add up all
loads that are to be placed on that component/accessory .
If one of these labels is ruined or not readable, it is necessary to replace it.
Following is an example:
We remind you that 1 kg corresponds to 2.204 lb.
Environmental conditions
MINI must be transported, used and stored in a dry environment and away from heat
sources.
Trasportation and installation
1
For the transportation of the
packed trolley (a)
and of its
accessories (b)
(if there are any)
use
adequate
lifting
and
transportation means.
During
transportation
it
is
possible to stack a maximum of 2
packed trolleys.
The figure on the right shows an
example
of
a
correct
load
configuration).
2
Cut the packing strips (c) and
remove the reinforcing corners (d)
fixed to the pallet.
continued
a
b
c
d
