background image

18

Auto-Start Quick Closing String Grip-
per Operation

The Quick Closing gripper will automatically 
tension string without the need to press a ten-
sion lever or button. To tension a string, wrap 
the string clockwise around the string guide 
and insert the string between the string gripper 
plates.  Excessive slack in the string should 
be removed before applying tension.  Tension 
string by placing the string between the parallel 
gripper jaws and pulling the string perpendicular 
to the gripper plates. As the gripper jaws begin 
moving forward they will engage the sensor 

built into the front of the gripper housing and the gripper will automatically pull tension. To 
release tension on the string depress the tension lever switch or use the foot pedal switch.  

For adjustment of the parallel plates, see “Setting the Gripper Plate Spacing” on page 27.

STRING GRIPPER OPERATION

CAUTION: 

NEVER TENSION A STRING WITH YOUR FINGERS BETWEEN 

THE STRING AND THE STRING GUIDE AS SERIOUS INJURY COULD RE-
SULT IF YOUR FINGER IS CAUGHT BETWEEN THE STRING AND STRING 
GUIDE DURING TENSIONING.  

PUSH ANY BUTTON TO RELEASE 

TENSION.

Содержание 9900 Els

































Отзывы: