Mounting the Frame
Adjusting the Frame Support Posts
Place the racquet frame over the center support slide
and onto the frame support. Loosen the lever lock bolt on
one support post. Slide the post outward until the center
support of the racquet support slide is positioned near
the inside surface of the racquet frame. Securely tighten
the lever lock bolt.
Adjust the opposite post using the same procedure.
Caution: To avoid racquet damage, the support slide
should not contact the racquet prior to fixing the support
posts.
Securing the Shoulder Supports
Secure the racquet frame with the shoulder supports by
rotating the large adjustment knobs on the outside of the
support post assemblies clockwise. Adjust the supports
until firm contact is made between the shoulder supports
and the frame.
The tear drop shaped holes towards the back of the
shoulder supports are handy for holding the loose
end of the string while pulling the string through the
racquet. Simply insert the loose end into the tear
drop shaped holes and slide the string into the point
of the hole.
Shoulder Support Adjustment
The shoulder supports are adjustable to provide support
to the racquet frame. Loosen the knurled knob at the
bottom of the shoulder support and swivel the support so
that the pads will contact the frame squarely when the
arms are closed against the racquet. Should the shoul-
der supports block string holes, adjust the position of the
racquet between the arms until the shoulder supports
contact the racquet between grommet holes.
14
