5.
Controller configuration
Following configuration options are specified at order time:
▪
Input mains a.c. voltage
The controller uses a universal input of 90-240 V a.c., 48-62 Hz.
▪
NEG pump connectors
Single output connector J510 Output 1 on the rear panel.
5.1.
Input mains a.c. voltage
Controller does not have universal power input. Input mains AC voltage is
part of the controller configuration. Following options are available:
▪
100-120 V a.c., 57-63 Hz
▪
200-240 V a.c., 57-63 Hz
Care must be taken when connecting controller to mains a.c. voltage to
avoid connecting controller to wrong input voltage.
5.2.
Number of TSP pump connectors
Following options are available:
▪
Single output connector J510 Output 1 (TSP 1) on the rear panel. See
DIGITEL TSPq standalone configuration
on page 14 for details.
▪
Two output connectors J510 Output 1 (TSP 1) and J511 Output 2 (TSP 2) on
the rear panel. See
DIGITEL TSPq standalone configuration
on page 14 for
details.
▪
No connectors. Remote connection J113 connector installed. Used in
combination with Remote TSP Controller. See
on page 15 for details.
5.3.
DIGITEL TSPq standalone configuration
Figure 4. DIGITEL TSPq standalone configuration
Page 14
900035_B
900035_B - Controller configuration
