Menu Operation
MENU
Address
DMX Address Set DMX Address, 1-512
Work Mode
DMX Mode
Set the signal mode, the only option is
DMX mode for this fixture.
CH Mode
Set the DMX
Channel
Mode
14 CH – Default mode for xLights Model
Supplied
17 CH – 16 bit mode, good for use with
stage lighting consoles.
Test Mode
Sets the unit in TEST mode – allowing you to manually
scroll and set values for each parameter of the light.
XY Setup
Allows you to
invert and
modify the
pan and tilt.
X Invert: Inverts the pan of the light.
Y Invert: Inverts the tilt of the light.
XY Speed: Can be used to slow down the
speed of the light. Default is “High”.
Signal
Allows you to see a readout of the DMX values being
received.
System
Allows you to
change
system-wide
setttings.
Backlight Time
Screen Direction
Language – English or Chinese – CHANGE
WITH CAUTION!
Reset
Does a re-homing of the unit.
DMX Setup
DMX Basics
DMX512 stands for digital multiplex 512. This means that 512 channels are controlled
digitally through 1 data cable.
A channel is a set of 255 steps that are assigned to control attributes in each light. This
may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.
Arion 300 IP
Page 9 of 18