24
Chapter 2 Installation
Hint! Never install the refrigerator next to a heat source!
How does it work
A refrigerator works by extracting heat from the space to be refrigerated and to release this in the
surrounding area.
For maximum air circulation it is recommended to allow
at least 10 cm space
around the refrigerator.
Be very careful never to obstruct the air inlets and outlets.
Installing the product
Place the product on a smooth surface.
1
Place the product at his position.
2
Make sure the product is standing level using a spirit level.
3
The product should be placed with feet to provide adequate air circulation around the cabinet. This for an
optimal operation of the product and to dispose a possible leakages of R600a. Also, the legs are used for
product adjustment and leveling.
Power supply
• If this device cable is damaged it must be replaced with an original cable supplied by the producer.
• In case of emergency: remove the plug lead from the socket.
• The socket should be within easy reach of the cabinet.
• Check for the correct power supply, referred to the information on the type plate.
• Ensure that the plug lead cannot be trapped or snagged.
• If necessary the plug lead can be extended by a qualified electrician.
• We do not recommend the use of an extension lead.
Fluctuations in the power supply can cause damage, which causes the cabinet to switch off.
Gamko cannot be held responsible for any consequential damage.
EMERGENCY STOP
REMOVE THE PLUG FROM THE SOCKET!
