Gamko 000030058, Руководство пользователя

Страница: 51 / 72

51
[55]
Defects
The appliance does not start.
• Check the powerplug.
• Check the power switch next to the thermostat.
• Restore power by possibly replacing a faulty fuse or switch.
• Please notify your service partner.
Temperature is too high, Despite the correct thermostat set point.
• Check that the condenser is clean (see Chapter 4: Maintenance).
• Check that fan rotates
• Remove any objects that may block the air ventilation.
• Check magnetic door seal, clean or replace if necessary.
• Defrost evaporator.
• Thermostat is defective. Please notify your service partner.
Temperature is too low, Despite the correct thermostat set point.
• Thermostat is defective. Please notify your service partner.
Water spillage
• Make sure doors / drawers close properly.
• Check that any holes made during installation are well sealed.
• Make sure the appliance is level.
• Defrost regularly - perhaps additional manual defrost (see manual thermostat).
• Please notify your service partner.
CE declaration of conformity for machines
(directive 2006/42/EC, Appendix II, sub A)
Manufacturer: Gamko BV
Address: Mon Plaisir 75
4879 AL, Etten-Leur
The Netherlands
Herewith declares that
ECO-line type E3
• E3/
XX
meets the requirements in accordance with:
• The EC machines (Directive 2006/42/EC)
• Electromagnetic compatibility (Directive 2004/108/EEC)
• Directive low-voltage (Directive 2006/95/EEC)
• PED pressurised equipment (Directive 97/23/EC)
• RoHS directive (2002/95/EC)
Etten-Leur, 14 - 01 - 2014
N. Govers
Manager R&D