Instruction Manual :
PLATFORM 2-MAN LADDER STAND
24
4. a. Loop the D-loop end of the two 16’ criss cross straps
(27) through the loop end to form a cinch knot around
the ladder rail tube. Secure beneath a step rung, at the
stabilizer bar height location.
SEE FIGURE 17A.
b. With the stand level and being held in place by two
people, the third person must cross one of the 16’ criss
cross straps (27) behind the tree and feed the free end
through the opposite D-loop.
SEE FIGURE 17B-E.
c. Criss cross the other 16’ stabilizer strap (27), forming
an “X” pattern on the of the tree and feed the free end
through the opposite D-loop.
SEE FIGURE 17B-E.
5. Make sure the criss cross straps and stabilizer bar strap
are snug and the tree blade is still contacting the tree.
NOTE: This ground level ladder-to-tree attachment will
prevent the ladder from pulling away from the tree
while ascending to the top for final 6’ ratchet strap (26)
attachment. The same holds true when the ladder is
removed.
6.
With two people securely holding the ladder,
use the
three point contact climbing method to slowly climb the
ladder and carefully keep a constant hand grip on the
ladder at all times. Always lean forward, toward tree, to
keep top section tree blades against the tree.
Be certain
ladder bottom is firmly seated on dry, level ground.
Attach your harness tether to the tree before securing
the platform to the tree and stepping onto platform.
Refer to the Full Body Harness instructions included
with this product.
STEP 3
FIGURE
17A
FIGURE
17B
FIGURE
17C
FIGURE
17D
FIGURE
17E
