Installation Instructions
Step 5:
Raise harness tree strap higher up
tree according to harness
manufacturers instructions as shown
in Figure 17.
Lift up seating platform as shown in
Figure 18 so it is at waist high.
WARNING! ALWAYS KEEP
HARNESS TETHER SLACK AT
MINIMUM.
Step 6:
Sit down on climbing bar on seating
platform. See Figure 19.
Continue repeating steps 4 and 5 to
slowly climb up tree, moving
approximately 12 inches at a time until
seating or standing platform becomes
level or you reach desired hunting
height.
WARNING! IF SEATING OR
STANDING PLATFORM IS
LEANING/TILTED DOWN, STOP!
RETURN TO GROUND AND RE-
ADJUST CLIMBER CABLE
LENGTH.
21
Never climb or hunt with front of seating or
standing platform leaning/tilted down from
tree.
If this occurs, climb down tree and while
standing on ground, tighten cables to increase
upward angle.
Never adjust climbing treestand angle or
remove Cable Locking Pins while in treestand.
All adjustments must be made at ground level.
Figure 17
Figure 18
Figure 19
Содержание Climber 2.0
Страница 1: ......