Game Winner Climber 2.0, Инструкция по эксплуатации

Страница: 14 / 25

Assembly Instructions
Step 6:
Step 7:
Locate the Seat Cushion.
Unfasten the buckles that are
attached on seat. Slip the
Seat Cushion into the Seating
Platform. Lay the seat straps
over the Seating Platform
frame and thread buckles as
shown in Figure 6.
NOTE: Lengthen or shorten
the seat straps to a
comfortable seating height.
14
Figure 6 Install Seat Cushion
Figure 7
Check Connector Strap
Climber stand is equipped with
a 1 inch wide Connector Strap.
The purpose of this strap is to
connect the Standing Platform
to the Seating Platform. During
use, should the Standing
Platform inadvertently slip off
the user's feet, the connector
strap will keep the platform
from slipping down the tree.
Retrieve it by simply pulling on
the Connector Strap.
WARNING! Conector Strap
has been factory pre-installed
for your safety. It is for the
express purpose of connecting
the Standing Platform to the
Seating Platform. DO NOT
modify or disconnect this
Connector Strap for any
reason. Failure to follow these
instructions may result in
serious injury or death!
Connector
Strap