Care and Maintenance
Page 7 of 8
Tips
◆
Cord storage is under motor housing.
◆
If the grinder is locked, turn grinder off and
press the reverse button. If this does not unlock
the grinder, turn the unit off, unplug the electrical
cord from the outlet and disassemble the grinder
head and remove the obstruction. Reassemble and
continue grinding.
◆
Make sure that the over load protector is active.
If the over load protector button bounces up,
please press it down to keep it active.
Warning!
Please always stop machine or make
sure the “GRIND/OFF” switch is on “OFF”
position before you press reverse button, otherwise
that would damage machine.
How to clean your grinder:
Meat left behind in the grinder head may be removed by passing a
slice of bread through the grinder head
1.Before clean up of the grinder, switch the appliance off and unplug
from electrical socket.
2.Remove the meat stomper and meat tray.
3.Lift up the lock handle to release the grinder head from the main
body.
4.Unscrew the retaining ring and remove all parts from the grinder
head. Hand wash in warm soapy water.
Grinder parts are not
dishwasher safe. CLEAN IMMEDIATELY AFTER USE.
5.Rinse with clear hot water and hand-dry IMMEDIATELY.
6.We advise you to lubricate the knife and the grinding plates with
silicon spray.
