GAME CHANGER AUDIO PLASMA Rack, Руководство пользователя

Страница: 14 / 24

MIDI CONTROLS
All parameters of the PLASMA Rack can be controlled with MIDI - via CC messages and
via Program Change messages.
Configuring the PLASMA Rack’s MIDI Tx(Transmit) an Rx(Receive) Channels:
1) Turn the PLASMA Rack OFF, using the front panel POWER button
2) PRESS and HOLD the CLEAN EQ and DYNAMIC buttons until they start blinking
3) Now you can configure the MIDI Tx Channel by tapping the OVERSATURATE button a
specific number of times - for example, if you wish to set the Rack’s MIDI Tx channel to
Channel Three, then tap the OVERSATURATE Button 3 times.
4)To configure the PLASMA Rack’s MIDI Rx Channel - tap the CLEAN GATE button.
For example - Rx Channel 4 would mean 4 taps on the CLEAN GATE button.
5) To SAVE press and hold the CLEAN EQ button until it blinking stops.
6) To exit without saving press the DYNAMIC button.
Any combination of knobs and buttons can be saved on one of PLASMA Rack’s eight
preset slots.
PRESET SLOTS 1 - 8 are indicated by 8 front panel buttons shown below
To save a preset:
1) Configure a Sound that you wish to save on the PLASMA Rack
This includes the positions of all rotary knobs and all sound-related buttons (excl. Power, MIDI
Send, PAD, FX LOOP).*
2) PRESS and HOLD the MIDI SEND button until it starts blinking.
3) You will see that the POWER button is ON, while the MIDI SEND and FX LOOP buttons are
blinking (since preset slot 1 is indicated by the FX LOOP button)
Tap the MIDI SEND button to navigate through the remaining 7 Preset slots.
4) When you’ve chosen one of the eight available Preset Slots, PRESS and HOLD the MIDI
SEND button to save the Preset.
5) To Escape before saving - PRESS the POWER button.
Settings saved as Presets can be recalled by MIDI Program Change messages 01 - 08.
Program Change Message 09 will return the PLASMA Rack to actual front panel settings.
13
*CLEAN/DRIVE Toggle and EXP Pedal assignment are also saved