SCREEN SUPPORT INSTALLATION
Screen supports are recommended on all laptop dock/cradles in
high-vibration environments.
Screen support can be purchased from www.GamberJohnson.com
Part Number: 7110-1401
Remove the two #6-32 screws that are currently on the docking station
and slide the screen support in between the metal plate and plastic.
once the holes line up use the screws that were removed and tighten
to the recomended torque.
This can be done on either side of the dock, do not over-torque screws.
Reccomended torque is 8-11 in/lbs.
Screen Support
Mounting Locations
5 / 7