7160-1728-XX
TOUGHBOOK 40 Laptop Docking Station
Rev A
INST-1100
Printing Spec:
PS-001
© Copyright 20XX Gamber-Johnson, LLC
This instruction sheet is for the Panasonic TOUGHBOOK 40 Laptop docking station only.
For instructions on features, set-up, and operation of the computer, please refer to the
manual provided by Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with each
individual product.
1/1
This instruction sheet is for the following products:
Item No. 7160-1728-00
No RF
(External Power Adapter sold separately)
Item No. 7160-1728-02
Quad RF
(External Power Adapter sold separately)
Item No. 7160-1728-06
No RF Lite
(External Power Adapter sold separately)
Item No. 7160-1728-07
Quad RF Lite
(External Power Adapter sold separately)
Panasonic recommends using a Lind Auto Adapter to power the docking station. The
following power adapters have 15.6Vdc output (120W) and are sold separately unless
ordering a KIT.
7300-0461
- Auto (11-16Vdc input) Bare Wire -
Available in KIT 7170-0943
7300-0462
- Auto (11-16Vdc input) Cig Adapter
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
