background image

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications 

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is 

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson 

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage 

Product Mounting Disclaimer 

Rev. A

INST-985

This instruction sheet is for the Gamber-Johnson Touch Screen only. For instructions on 

features, set-up, and operation of any computer or connected device, please refer to the 

manual provided with those products.
This touch screen is designed to be used with a variety of mounting systems. Installation 

instructions for other Gamber-Johnson products are provided with each individual product.

1 / 9

INSTALLATION INSTRUCTIONS

Product

Revision

Form

Printing Spec: 

PS-001

7160-1451

13.3" TOUCH SCREEN

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868.

This instruction sheet is for the following products:

Item No. 7160-1451-00

   Bare Wire Power, HDMI and USB Type B  

The touch screen is designed to handle a 11-16Vdc input and Gamber-Johnson 

recommends using the bare wire cable included. The standard use voltage is 12Vdc and a 

minimum 5A. Gamber-Johnson offers the following Power Adapters to power the touch 

screen if needed in other enviroments. These Power Adapters can be ordered from 

Gamber-Johnson separately.

7300-0476    

- AC         (100-240Vac input)  2-prong standard AC plug

7300-0461

    - Auto       (11-16Vdc input)      Bare Wire

7300-0462

    - Auto       (11-16Vdc input)      Cigarette Adapter

7300-0464    

- Isolated  (12-32Vdc input)      Bare Wire

7300-0465

    - Isolated  (20-60Vdc input)      Bare Wire

7300-0417  

  - Isolated  (72-110Vdc input)    Bare Wire

Содержание 7160-1451










Отзывы: