5 / 5
#8-32 X .62 Socket Head Screws
& #8 Flat Washers
LED Light Assembly
The LED Light Assembly can be mounted on
any corner of the Notepad™ V Cradle.
Remove the two Phillips Flat Head Screws
found on the corner.
Place the LED Light Assembly over the holes
and attach using two #8-32 x .62 Socket
Head Screws and two #8 Flat Washers.
The LED has three light options: Red, White/Red and off.
In a negative ground vehicle:
Connect the RED wire to the positive pole of the
vehicle battery or power distribution box.
It is recommended that the supplied fuse holder
and 1 amp fuse be installed on the red wire.
Connect the BROWN wire to a suitable chassis GROUND
or the NEGATIVE pole of the battery.
The LED is powered using the red and
brown wires on the light base. The LED
Assembly is designed to operate on 12 VDC.
7160-0252 LED Light Assembly
Notepad™V Accessories Cont.
