ESH150
–3PE~400V
Service manual
12/56
Ref. NR-000144-ENG
32. Isocyanate tank (OPTIONAL)
Contains chemical component “A”. Capacity 30 litres.
33. Polyol tank (OPTIONAL)
Contains chemical component “R”. Capacity 30 litres.
34. Isocyanate recirculation valve (OPTIONAL recirculation hoses only)
Enables selection between recirculation and spray for the isocyanate circuit.
35. Polyol recirculation valve (OPTIONAL recirculation hoses only)
Enables selection between recirculation and spray for the polyol circuit.
36. TCS DIP switches
Enables selection of the hose heater control mode depending on
whether hoses incorporate a temperature control sensor (TCS).
See page 14 point 2 of this manual for instructions on selecting the
correct control mode.
The unit must be disconnected before
operating the DIP switch.
37. Temperature units DIP switch
Enables selection of temperature units on the control panel
displays. Set this switch to the “EU” position to display the
temperature in
degrees Celsius (ºC), or “USA” to display the
temperature in degrees Fahrenheit.
The unit must be disconnected before operating the
DIP switch.
38. Motor DIP switch
Activates/deactivates the hydraulic drive. Factory settings depend
on the model.
The “Motor DIP” selector function is only active
in units with hydraulic drive.
The unit must be disconnected
before operating the DIP switch.