page 4
Replacing the Battery
After several years of use, the battery may need replacing.
1. Remove the lamp from the bracket it is mounted to.
2. Remove the battery compartment cover by unscrewing the two screws.
3. Remove the two batteries from the compartment.
4. Install the new batteries into the compartment and ensure the positive
and negative terminals line up. Make sure the new batteries are a high
quality – (2x) Li-Ion Battery (3.7 Volt/2000mAh).
5. Re-assemble by reversing Steps 1 and 2.
MAINTENANCE
Clean the solar module regularly with a damp towel to guarantee optimum performance of the solar
panel. Do not use any type of solvent for cleaning and be careful not to put too much pressure on the
module while cleaning.
TROUBLESHOOTING
If your solar charged light does not come on at dusk despite observance of all the instructions,
please try the following steps:
1. Make sure that the solar light is not being affected by any other light source.
2. Ensure the solar light is not positioned in the shade during the day.
3. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp will vary with the time of year. It will deliver more light
when it has had a full day in the sun rather than a day in overcast weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries
much more efficiently.
WARNING: Please keep out of reach of children.
WARNING: Please keep out of reach of children. Do not dispose of Li-Ion battery in the regular trash,
municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or
mutilate batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or
disposing of them in accordance with local, state and federal regulations. Do not mix old and new
batteries.
Replacement batteries are available
at www.gamasonic.com or via our Toll free number: +1-800-835-4113
