1. 1. 2
1. 1. 2
Direct Wall Mount Install
Extension Arm Mount Install
1. Mark two holes for the shorter
Wall Mount Bracket
(Part B)
in the
desired location using the mount as
a template.
1. Mark four holes for the Arm Mount
Bracket
(Part C)
in the desired
location using the mount as a
template.
2. Drill two holes and insert the anchors
from
(Part E)
into the holes.
2. Drill four holes and insert the
anchors from
(Part E)
into the holes.
3. Secure the Bracket
(Part B)
to the
wall using the screws from
(Part E)
.
NOTE: Make sure the slots in the bracket
are facing up.
3. Secure the Bracket
(Part C)
to the
wall using the screws from
(Part E)
.
Note: There are specific types of screws
for different surfaces. If you’re unsure
of the appropriate type of screw to use
on your desired surface, please consult a
professional.
4. Partially thread in the two Screw
Knobs
(Part D)
to the back of Lamp
(Part A)
.
6. Tighten the Screw Knobs
(Part D)
so the lamp is secure to the bracket
(Part B)
.
4. Place the Lamp
(Part A)
in line
with the end of the Bracket
(Part C)
and secure using the Screw Knobs
(Part D)
. Tighten the knobs so the
lamp is secure.
page 3
5. Slide the Lamp
(Part A)
on
to the bracket
(Part B)
so the
threads from the knobs
(Part D)
are in the slots of the bracket.
Operation Instructions
Turn the lamp on using the toggle switch and choose the
desired setting:
High =
Brighter Light Output
Low =
Dimmer Light Output but longer duration
Choose the desired color temperature using the toggle switch:
Warm =
Warm light (3000K)
Cool =
Bright White light (6000K)
The lamp will operate automatically at dusk.
