background image

Replacing the Batteries (Fig. 3) 

(After several years of use, the battery may need replacing). 

1. Detach the top of the lamp unit (E) by releasing the 2 screws.  Make sure the

ON/OFF switch is in the OFF (O) position.

2. Unscrew the battery compartment screw.
3. Unclip the connector and remove the old battery. Make sure the new battery is

high quality 3.2V/1500mAh Li-Ion rechargeable battery with connector.

4. Clip on new battery and install into the battery compartment Re-install battery

compartment cover.

5. Reassemble the unit by reversing the above procedure.

WARNING

: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by 

fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury 
may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in 
accordance with local, State and federal regulations. Do not mix old and new batteries. 

Maintenance 

Clean the solar panels regularly with a damp towel to guarantee optimum performance. Do not 
use any type of solvent for cleaning and be careful not to put too much pressure on the solar 
panels while cleaning. 

Fig. 3 

Содержание WESTON GS-53PIR-FPW






Отзывы: